High quality Ford VCM II VCM 2 diagnostic tool for Ford repair

When your ford car have a error code , or your car have some electric problem , like ABS system ,Dashboard error ，change part can't Unrecognized...
Many of this problem you need a car diagnostic tool.

Ford VCM II diagnostic tool is the newest OEM diagnostic tool for Ford,it support 2013 ford vehicles and is backwards compatible with most 16 pin Fords. ,it use with the Newest Integrated Diagnostics Software (IDS).The Ford IDS & VCM II combination, is the only equipment that provides complete diagnostic coverage, including module programming and key programming of 1996 to current and future Ford vehicles. The IDS will operate on multiple PC platforms meeting the minimum specifications.

Software Version: V87

Why buy this High quality

1.High qualityprogram offline,cheap one can't do it.

2.It supports the Vehicle Measurement Module (VMM)

3.It supports new Customer Flight Recorder (CFR). (option)

CFR 

The CFR replaces the Vehicle Data Recorder (VDR). 
The CFR is an optional cable that allows the VCM II to monitor and record live data streams. 
This provides an advantage for technicians when diagnosing intermittent problems.

The VCM II and IDS, along with a dedicated laptop, provides full dealer diagnostic capabilities for most 16 pin Fords.
A fantastic new function of the VCM 2 is its ability to communicate wirelessly with your laptop or computer without any hardware or software upgrades.

Please Note the differences between VCM I & VCM II: 

• VCM 1 (original interface) can be used with Ford, Land Rover or Mazda software (subscriptions required), but each OEM software must be installed on a separate Windows OS installation. *Coverage: ’98 - ToDate (Ford support stops in 2015)
• VCM 2 is designed to be used with only Ford software (subscription required). VCM2 is required to complete key & immobiliser functions on Fords from mid 2011 onwards. Coverage ’96 – ongoing 

Ford VCM II Features:

 

1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.                                        

2. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).                                  

3. The VCM II and IDS provides full dealer diagnostic capabilities for most 16 pin Fords.                                                  

4. The VCM II will be required for all new 2013 Ford vehicles and is backwards compatible with most 16 pin Fords.

It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).                                                              

5. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.                                          

6. The CFR replaces the Vehicle Data Recorder (VDR).                                                                                                                          

7. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing

 

 

Ford VCM II Function:

 

* Automatic vehicle recognition

* Read & Clear Diagnostic Trouble Codes (DTCs)

* Live Data-stream with Recording & Playback Functions for Main ECUs

* Guided Fault Finding

* New Software Re-flash for Existing ECUs

* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)

* Program New Keys

* Injector Coding

* Set, Adjust or Remove Speed Governors

* DPF Regeneration

* Brake Bleeding

* Steering Angle Resets

* All Other Dealer Functions

VW Audi Electronic system maintenance tools AVDI ABRITES Commander VAG

VW Audi Electronic system maintenance tools AVDI ABRITES Commander VAG
There are many Electronic control models in VW AUDI cars. Like
Airbag system , Security System，Dashboard，Immobilizer ，Instrument ...
If one have a problem ,how can you fix it...AVDI ABRITES Commander VAG is your best helper.
ABRITES Diagnostics for VAG is a Windows PC based diagnostic software for the vehicles from VAG. With the help of this tool you can perform operations with vehicles from the VAG group, which are in most cases unsupported by the manufacturer's diagnostic testers. The ABRITES Diagnostics for VAG provides you also a full diagnostic capabilities for VAG-vehicles.
Buy it from xcar360 only $1099 free shipping worldwide!

It can help you:

• Extracting security access codes (PIN) by OBDII
• Programming keys by OBDII. Preparation of dealer keys.
• Calibration by OBDII
• Clearing crash data DTCs by OBDII
• Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
• Exchange speed limit of MMI-TV system
• Coding calculator - supported short/long coding
• Synchronization/Adaptation KESSY and ELV

Also it can do some special function

Special functions:

* Immobilizer Data Configuration IPC/ECU - Extracting and displaying immobilizer related data by diagnostic. Ability for alignment of immobilizer related data – cluster/ecu. Displaying immobilizer related data from dump of flash and eeprom of micronas mcu in IPC

• Read/Program memory of instrument cluster immobilizer
• Read/Update immobilizer related data
• Read/Update immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII

* Instrument Cluster/Engine Control Module Recalibration -Reading and updating internal control module configuration memory by diagnostic. Extracting and recalibration security access code, PIN, component security bytes, current unit mileage value by K-line, CAN bus and UDS. Emergency start for engine control units EDC15, ME7.x.x.

• Cluster CAN - Cluster Calibration by OBDII - VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, VW Passat CC, VW Amarok, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...
  - Added support for VDO Instrument Cluster 2006+
• Cluster K-Line - With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000); You can Read/Change odometer value; Read PIN code; Read/Update ConfData; Read ROM/Flash from the Instrument cluster; Automatic removing of "DEF error" for Audi A4 instrument cluster BOSCH RB8
• Reading security access code of the IMMOBILIZER
• Read/Update ConfData (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.) 
  - Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD) 
  - Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
  - Enable/Disable immobilizer (EDC15, ME7.x, EDC16) 
  - Calibration (EDC15, EDC16)

* ECU Advanced Diagnostic Functionality - Extracting and displaying security code, PIN, control module configuration memory content, component security data from engine control units EDC16, MED9, SIMOS PPD. Emergency start for engine control units EDC16

* Airbag Control Module – Advanced Diagnostic Functionality - Ability to manage stored crash data and configuration memory of electronic control unit. Read/Update Config Data of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ... With this special function you can Read/Update ConfData memory of the airbag module. Clear the crash data of the airbag module

* ECU Adaptation by Diagnostic - Adaptation of engine control units to the vehicle. Supported are EDC16,EDC17, MED17, MED9, Simos PPD, ME7.5.20, ME7.5.30

• ECU adaptation by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30

* ECU Component Protection Data - Extracting by diagnostic and displaying PIN, component security data and MAC – EDC17, MED17

* BCM2 Key Programming by Diagnostic - This function will allow the preparation of a key ready for adaptation by diagnostic to the vehicles with BCM2 – Audi A4, S4, RS4, A5,S5, RS5, A6, A7, A8, Q5 / VW Touareg

* Key Adaptation and Programming - Guided key adaptation functions, preparation keys suitable for the vehicle (dealer’s keys). Included are also Audi A6, Audi Q7, Audi Allroad, VW Crafter(with EDC16 ECU), VW Passat, (BCM2 based vehicles are supported only with the help of ABProg*)

• Key programming/adaptation
• Reading security code (PIN) and component protection by OBDII - VW CRAFTER
• EZS - Kessy (Q7/A6/Allroad)
  - With this function you can prepare dealer key/learn dealer key
  - Read/Update ConfData from EZS - Kessy (Q7/A6/Allroad)
• Programming keys by OBDII (VAG with 16 bytes Component Security) - VW Crafter, Audi R8, VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...
• Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2)
• LAMBORGHINI GALLARDO
• With this function you can learn key/transponder to the vehicle

* ECU EDC17/MED17 programmer through boot-mode - Full access to the memory through boot-mode (CAN bus)

• Read EDC17/MED17 flash memory, PIN, CS

* Component Protection Manager (generation 1/2) - This function will allow adaptation of used electronic control units in the vehicle. Audi A8, A6, Q7,Allroad, A4, A5, Q5

• Component Protection Manager - adaptation of spare part (used electronic control units) and programming component protection of Audi A6/Q7/Allroad/A4/A5/Q5