Carprog Full v7.28 tokens run out (solved)

Caprog full v7.28 airbag reset tool tokens run out,device not in use problem solution is provided.

-----Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

Problem:

My Carprog full v7.28 has run out tokens and stop working. How to solve the problem

Answer:

Carprog full airbag reset tool comes with no token limitation. If you have run out tokens, change another computer and copy carprog software from CD, the device will keep working. You can download software and change another PC as well.

If you need software, please contact xcar360.com customer service to provide you the free software link

If fail to add tokens, you’d better send the main unit back to repair.

CARPROG FULL is designed with regard to demands of our customers to have universal tool for car radios, odometers immobilizers repair including advanced functions like EEPROM and microcontroller programmer, key transponder programmer. The latest V7.28 Carprog is better at airbag resetting than V6.8.

Carprog supports airbag resetting for:

VAG (Audi, VW, Skoda and Seat) Airbag

BMW Airbag

Mercedes Benz Airbag

FORD Airbag

GM Airbag by OBDII

CARPROG CR16 Airbag tool – Audi, Mercedes, Ford, Volvo

Renault Airbag

Peugeot Airbag

Citroen Airbag

Honda Airbag

Audi Airbag by direct connection to EEPROM or MPU

Ford Airbag by direct connection to EEPROM or MPU

Hyundai Airbag

KIA Airbag

Lexus Airbag

Rover Airbag

Mazda Airbag

Mitsubishi airbag

Nissan Airbag

Mercedes Benz Airbag by direct connection

Opel Airbag by direct connection

Saab Airbag by direct connection

Subaru Airbag by direct connection

Toyota Airbag by direct connection

Alfa Romeo Airbag

Fiat Airbag

Porsche Airbag

Suzuki Airbag

Volvo Airbag

Daewoo Airbag

Carprog supports odometer change for:

VAG CAN cars

Mercedes Benz ASSYST explorer

VDO dash decrypt tool – Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading

Ford by OBDII (by CAN)

VW 2007+ by OBD – Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas by OBDII

VAG VDO dashboards by K-line OBDII – VW T5, Passat B5, Skoda SuperB and others

2J74YAUDI – Audi 2J74Y repair software for CarProg

4. Carprog supports key programming for:

Toyota Key

Lexus key

Daihatsu Key

CarProg BMW Key

Mercedes Benz Key

RENAULT Megane/Scenic infrared key

It also supports PIN code reading for A8, Touareg, Phaeton and Cayenne

5. Carprog supports MPU programming for:

CARPROG Motorola (Freescale) HC05 MPU

CARPROG Motorola (Freescale) HC11 MPU

CARPROG Motorola (Freescale) HC08 MPU

CARPROG Motorola (Freescale) 912 and 9S12 MPU

6. Carprog ecu chip tuning tool supports EEPROM programming for: ST92F120, ST92F150, and ST92F250 internal EEPROM
7. Carprog supports radio code reading for:

CARPROG CC1

CARPROG CC2

CARPROG CCN

Philips Car Radio

Renault Car Radio by serial number

Audi/VW/Seat/Skoda

• RNS510 – Navigation decoding tool by Navi diagnostic

Xcar360 Automotive diagnostic tool , diagnostic software

More information

Contact

Steven

Senior Sales Engineer

Xcar360.com

sales@xcar360.com

Skype:uuc050

Whatsapp:8613922818729

Carprog full v7.28 vs. Carprog v8.21 vs. Carprog v9.31

Newer Carprog v9.31 and v8.21 has been released to replace 7.28 version at Xcar360.com. Caprog v9.31 is the latest version with the plug-and-play feature and no need activation, while Carprog 8.21 highlights the online feature and the most vehicle coverage.

-----Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

Carprog full v7.28 vs. carprog v8.21 perfect online version vs. carprog v9.31

Product	Carprog with 21 adapters
Software version	Carprog V7.28	Carprog V8.21 firmware version	Carprog V9.31
Item No.	CV28	CV82	CV31
Online	NO	Yes, it’s the super online version.	NO
Activation	Activation after delivery	Activation after delivery	Activation before delivery; Directly use it
Operating system	Win XP, Win?7	Win XP,Win7, Win8,Win10	Win XP,Win7, Win8,Win10
Vehicle coverage	V7.28 carprog support the least models among the three versions.	V8.21 Carprog’s firmware is authorized more cars so that it support the most vehicle models.	V9.31 carprog supports more vehicle models than v7.28
	Models coverage: caprog v8.21 > v9.31 > v7.28
Software	All carprog versions above can work well with ECU-OPEL, OPEL CAN, PSG16, OPEC28 software.
Tokens	automatically get token renew after it used up
Function	Airbag reset —> BEST Dashboard programming, immo (read pin code), MPU &?EEPROM programming, radio decoding.
User feedback	Carprog v9.31 read and erase BMW EEPROM M35080
Conclusion	Carprog v8.21 is the best option for the most vehicle coverage and online use, while carprog 9.31 as a plug-and-play kit, is more convenient to use. Carprog v8.21 has different serial number as carprog v9.31/v7.28.

Attachment: Carprog function list and adapter list

Carprog Airbag:
S5.1 – VAG (Audi, VW, Skoda, Seat) Airbag Reset Tool
S5.2 – BMW Airbag Reset Tool
S5.3 – Mercedes Benz Airbag Reset Tool
S5.4 – FORD Airbag Reset Tool
S5.5 – GM Airbag Reset Tool by OBDII
S5.6 – CARPROG CR16 Airbag tool – Audi, Mercedes, Ford, Volvo
S5.7 – Renault Airbag reset tool
S5.8 – Peugeot Airbag Reset tool
S5.9 – Citroen Airbag Reset tool
S5.10 – Honda Airbag Reset tool
S5.11 – Audi Airbag reset tool by direct connection to EEPROM or MPU
S5.14 – Ford Airbag Reset tool by direct connection to EEPROM or MPU
S5.16 – Hyundai Airbag Reset tool
S5.17 – KIA Airbag Reset tool
S5.18 – Lexus Airbag Reset tool
S5.19 – Rover Airbag Reset tool
S5.21 – Mazda Airbag Reset tool
S5.22 – Mitsubishi airbag reset tool
S5.23 – Nissan Airbag reset tool
S5.20 – Mercedes Benz Airbag Reset tool by direct connection
S5.25 – Opel Airbag reset tool by direct connection
S5.27 – Saab Airbag reset tool by direct connection
S5.28 – Subaru Airbag reset tool by direct connection
S5.30 – Toyota Airbag reset tool by direct connection
S5.31 – Alfa Romeo Airbag Reset Tool
S5.32 – Fiat Airbag Reset Tool
S5.33 – Porsche Airbag Reset Tool
S5.34 – Suzuki Airbag Reset Tool
S5.35 – Volvo Airbag Reset Tool
S5.36 – Daewoo Airbag Reset Tool

3. CarProg Dash:
   S7.1 – VAG CAN programmer
   S7.2 – CarProg Dashboard programming
   S7.3 – CarProg Dashboard programming package update
   S7.5 – Mercedes Benz ASSYST explorer
   S7.6 – VDO dash decrypt tool – Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading
   S7.7 – Ford odometer change by OBDII (by CAN)
   S7.8 – VW 2007+ by OBD – Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas by diagnostic
   S7.10 – VAG VDO dashboards by K-line OBDII diagnostic – VW T5, Passat B5, Skoda SuperB and others
   2J74YAUDI – Audi 2J74Y repair software for CarProg4. CarProg Immo:
   S4.1 – Toyota Key Programmer
   S4.2 – Lexus key programmer
   S4.3 – Daihatsu Key Programmer
   S4.4 – CarProg BMW Key programmer
   S4.5 – Mercedes Benz Key programmer
   S4.6 – RENAULT Megane/Scenic infrared key programmer
   S4.7 – Kessy tool – A8, Touareg, Phaeton, Cayenne PIN code reader
4. CarProg Processor:
   S2.1 – CARPROG Motorola (Freescale) HC05 MPU programmer
   S2.2 – CARPROG Motorola (Freescale) HC11 MPU programmer
   S2.3 – CARPROG Motorola (Freescale) HC08 MPU programmer
   S2.4 – CARPROG Motorola (Freescale) 912 and 9S12 MPU6. CarProg Programmer:
   ST92 – ST92F120, ST92F150, ST92F250 internal EEPROM programmer7. CarProg Radio Code:
   S6.1 – CARPROG CC1
   S6.2 – CARPROG CC2
   S6.3 – CARPROG CCN
   S6.4 – Philips Car Radio decoder
   S6.5 – Renault Car Radio decoder by serial number
   S6.6 – Audi/VW/Seat/Skoda car radio decoding software
   RNS510 – Navigation decoding tool by Navi diagnosticCarProg Aaapters:

1: CarProg Main harware interface

2: A1 – OBD2 Adapter Cable (Inside have K-line and CAN bus switches. Use with all cars complained with OBDII standard)

3: D1 – Odometer-airbag Adapter (Dashboard ,Airbag programming adapter )

4: A3 – Transponder Antenna ( Used with all CARPROG immobiliser software )

5: A10 – Motorola Adapter Cable (Motorola MCU programing adapter )

6: A11 – BMW EWS Adapter Cable  ( Used with BMW Immo software )

7: A16 – Car radio Cable  ( Used for Opel, Renault, Peugeot, Citroen car radio made by Philips decoding)

8: A15 – Cable (Used with D1 adapter ,Universal car dashboard and airbag programming adapter )

9: A17 – Honda Airbag OBD2 Cable (Adapter for Honda airbag reset by OBDII )

10: A4 – Eeprom Adapter Cable (Used for eeprom programming)

11: A5 – DIP8 Clip Cable  (DIP8 Clip for eeprom programming)

12: A6 – SOIC8 Clip Cable  (SOIC8 Clip for eeprom programming)

13: A7 – MB 38-Pin Cable  (Used with MB Airbag and dashboard software)

14: A8 – BMW 20-Pin Cable (Used with BMW airbag and dashboard software )

15: RNS510 Adapter Cable (RNS510 radio decoding interface cable )

16: VOLVO FORD CAN 2006+ Cable  (Needed for airbag and dashboard programming)

17: FIAT CAN 2006 Cable  (Needed for airbag and dashboard programming)

18: C1 OBD2 Female Cable

19: USB Cable

20: Power cable

21: CD  (Software V9.31)

https://www.xcar360.com/carprog-v7-28-full-adapters.html

Xcar360 Automotive diagnostic tool , diagnostic software

More information

Contact

Steven

Senior Sales Engineer

Xcar360.com

sales@xcar360.com

Skype:uuc050

Whatsapp:8613922818729

How to install R280 CAS4+ BDM programmer software

Here is the software installation guide of R280 Plus CAS4 BDM Programmer for BMW Motorola MC9S12XEP100 chip (5M48H/1N35H).

-----Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

NOTE:

Please turn off the anti-virus software before R280 installation, or use anti-virus software is set to be trusted software, so that the installation and use of R280 software.

Operating system:

Both Windows xp and Windows 7 worked

How to install R280 CAS4 Programmer software

Insert R208 disk and open it

Copy R280 Plus-3.rar to Desktop and then extract it

Open R280 Plus-3 folder and run R280 Plus.exe

Plug in the R280 programmer power supply and USB line

Open R280 Plus properties and find targets in local disk c:/program file/r280 plus/r280 cas4 driver

Run CP210xVCPInstaller.exe to Install the device driver

Click on Cancel in R280 Plus properties

Install software for R280 plus automatically

Install software for Silicon Labs CP210x USB to UART bridge (automatically)

Run “register controls.Bat” MS-DOS Batch File in disk c:/program file/r280 plus

Run R280 Plus software:

First, read M5080 in R270 in circuit programmer

Select MCU M5080

Read M5080

Save the bin file after reading m5080

Second, read 5M48H in R280 cas4 programmer

Select MCU 5M48H to read

Installation complete.

Xcar360 Automotive diagnostic tool , diagnostic software

More information

Contact

Steven

Senior Sales Engineer

Xcar360.com

sales@xcar360.com

Skype:uuc050

Whatsapp:8613922818729

BMW ICOM 2016.03 ISTA-D 3.53 ISTA-P 3.57 Win8 WIFI setting

2016.3V BMW ICOM Latest Software HDD for Windows 8 System ISTA-D 3.53.13 ISTA-P 3.57.4.003 with Engineers Programming is available in xcar360.com

-----Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

Software version:
ISTA-D 3.53.13
ISTA-P 3.57.4.003
VIN: 2015.12.08
Not connected 9000 days remaining

Support Multi-language in diagnose and programming, also TIS diagram circuit: American English, British English, German, Spanish, French, Italian, polish, Portuguese, Turkish, Czech, Swedish, Dutch, Indian, Greek, Russian, Simplified Chinese, Traditional Chinese, Japanese, Korean and Thai.

Works together with BMW ICOM, BMW ICOM A2, ICOM A3.

V2016.3 ICOM BMW Diagnostic Software List and Functions:

No.	Software Name	Software Function
1	ISPI-NEXT Admin Tools	ISPI-NEXT authorization software
2	ISPI Admin Client	ISPI-NEXT authorization management and environment Configuration software
3	ISTA-D(Rheingold)	Diagnostic and repair guide, including Diagrams and disassembly Figure
4	ISTA-P(ISSS-NEXT)	Programming and coding software system
5	HDD-Update	Navigation software upgrade back-office services (function with ISTA-P, need to Import map files)
6	KSD	Work software
7	ETK	Accessories Catalog
8	E-SYS	Engineer Software for F series (available for programming and coding)
9	WINKFP	Engineer Software for E series, for programming
10	NCS-Expert tool	Engineer Software for E series, for coding
11	INPA	Engineer Software for E series, for diagnosis
12	Tool32	Engineer Software for E series, able to run directly
13	BMW Coding Tool	Auxiliary Software of Engineer Software for E series (Available to import model data to WINKFP and NSC)
14	NcsDummy	Auxiliary Software of Engineer Software for E series (Available to modify NCS data)
15	IToolRadar	Used to recognize ICOM, activate or release ICOM Port
16	EasyConnect	Used to Configure the Environment Parameter of Engineer Software for E series, can activate or release ICOM Port

System Requirements:

Dual-core processor, better above I3; over 4G of memory

Support Model:

?It is recommended to use Lenovo ThinkPad: T61, T400, T410, T420, T430, X61, X200, X201, X220 X230 and other laptop with Intel chipset, such as I3 I5 / I7 series.

BMW ICOM WIFI setting:
1.Use network cable and Connect ICOM to OBD,ICOM will power on
2.Use Itool Radar to get your ICOM ip address.See picture ICOM-IP.png
3.Open IE and input your icom ip in url,
like: http://192.168.68.102:58000
Then you can see like picture ICOM-Ax-Info.png
4.Enter <WLAN Settings> you can see like ICOM-WLAN.png.
If your ICOM WLAN MAC is not null,it has wifi model.
If you use our usb wifi dongle,your need to setting icom wlan info like ICOM-WLAN.png
If you use your own workshop wifi,so you need to input your wifi’s SSID,Security Type And Pre-sheared Key.
Attention：Mode must be <802.11n,2.4GHz>.
5.press Save changes.
6.Disconnect ICOM network cable and obd
7.Don’t use network cable and connect ICOM to obd again,then icom running system,
wait and you will see ICOM wlan led is blinking,Led stop and on,ICOM is connected to wifi ok.

BMW ICOM software ISTA-D 3.53 ISTA-P 3.57 display:

E-SYS
E-sys Password:
12345678

ETK

ICOM-Ax-Info

ICOM-color

ICOM scanner-IP

ICOM-WLAN

ISTA-P Language Setting
Install windows language package
Mount c:\nasshare\mu_windows_8_1_language_pack_x64_dvd_2706084.iso
windows_key+r to input: lpksetup
Select language to install

ISTA-P Version

ISTA-P Version 3.57.4

ISTA-P ISPI Next-Info

KSD

www.xcar360.com

Xcar360 Automotive diagnostic tool , diagnostic software

More information

Contact

Steven

Senior Sales Engineer

Xcar360.com

sales@xcar360.com

Skype:uuc050

Whatsapp:8613922818729

BMW EKPM3 coding with ICOM NCS expert Software

I have managed to replace BMW EKPM2 with a new EKPM3 and do EKPM3 coding successfully. Here is what i used and what i did with BMW NCS expert coding software.

-----Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

You need:

You need to buy/download INPA and Ediabas, NCS expert and get the right SP-Daten files.

You also need to get yourself a OBD-2 connector e.g. INPA K+DCAN cable for your BMW to communication. ICOM A2 is the best choice for BMW diagnosis but more expensive than the K+DCAN inpa cable. It depends

The instruction i found to replace EKPM2 with a newer EKPM3 and code EKPM3:1. change EKPM module
2. open NCS expert
3. load Expertmode profile
4. choose your chassie E60 i gues
5. choose from where you want to get VIN and FA of your car it’s like LM,KMB,CAS…
6. choose “back” and then “process ECU”
7. choose EKPM
8. choose “change job” and select SG_CODIREN
9. choose “execute job” button
10. after a minute or two you’re done

But the guide is kind of old to deal with EKP3 module replacement (not on my car, helping someone else). The new module didn’t have VIN number programmed (virgin) and it also had the wrong ZB number as well. Here is what I ended up doing with BMW ICOM.
1.Installed the old module, navigated to UIF screen in INPA and made a record of KFP ZB number.
2.Installed the new module and programmed it using the ZB number from the old module.
3. Verified VIN number and ZB number were programmed correctly (INPA UIF screen). I did try to fire the engine, but it turned off shortly after it started.
4. Used NCS Expert “Expert” mode to code EKP module
5. Cleared errors with Rheingold.
DONE. The virgin EKP3 module had wrong ZB number (it says right on the sticker), most likely for another car (335i) as that ZB number wasn’t available in E60 assembly line.

Xcar360 Automotive diagnostic tool , diagnostic software

More information

Contact

Steven

Senior Sales Engineer

Xcar360.com

sales@xcar360.com

Skype:uuc050

Whatsapp:8613922818729