about clone VAG CAN PRO VPC 5.5.1
Q; Is the VAG CAN PRO a full version?
A: yes, it’s VAG CAN full kit.
Q: Does clone vag can supports coding and programming?
A: definitely yes. The VAG CAN PRO at XCAR360.COM can do offline coding and programming as the original.
Moreover, the clone doesn’t need engineer codes for coding or programming, while the genuine needs it.
Q: Does it support UDS protocol?
A: yes. It supports CAN BUS, UDS, K-line.
Q: Any difference among VCDS, VCP, ODIS
A: VCDS is good for diagnosis, and simply coding; runs very fast
VCP is best for parametring and quick eeprom read; runs fast
ODIS 3.0.3 is best for flashing; kind of slow when diagnose.....
about VCDS vs VAG CAN PRO
here are some discussion results of VCDS and VAG CAN PRO, which might help you to understand the differences of them and select what you need really.
VCDS and VAG CAN PRO + K are very close level features (there is also a small resemblance in the software interface of the two).
VCDS is the best known and most used of the two, so you more easily find topics on speaking forums VCDS that VAG CAN PRO + K.
VCDS is the best known and most used of the two, so you more easily find topics on speaking forums VCDS that VAG CAN PRO + K.
diagnostic Level, VCDS exceeds VAG cAN PRO + K, even if it progresses from version to version.
VAG CAN Commander is a tool used to retrieve and modify information from the program area of the ECU.
VCDS will give full access to all control modules in the car for diagnostic purposes. It will not allow you to modify the program memory of any ECU. Having said that, VCDS does allow you to "code" a module - selecting different factory installed options. All diagnostic procedures performed by the factory tool at the dealer can be performed using the VCDS tool. In fact, the tool design is made to conform with the same terminology used on the factory tool so that factory repair information can be used with the VCDS tool.
s on your PC. VCDS only supports the functions built into the modules that were intended by the designers for diagnosing problems and effecting repair of those problems.
coding level, some encodings are sometimes not possible with VCDS then they are with VAG CAN PRO + K (RLFS coding, coding ESP, also VIM coding which is a "specialty" of VAG CAN PRO + K).
more anecdotally, sometimes with some encodings require VCDS resume it several times before it is taken into account by the vehicle, while with VAG CAN PRO + K it works 1 shot.
the VAG CAN + K PRO software has a list of predefined functions, kinds of shortcuts to quickly do some actions without knowing the value of adaptation or corresponding coding.
It also has a backup feature and flashing the entire contents of a computer, that does not have the VCDS software.
prices level, it's a little more complicated for VAG CAN PRO + K.
in official, there is a price to pay (€ 306.27) for the purchase of the interface (this price includes free updates for 1 year), there is a price to pay (50 € per year) for 1 year annual subscription to updates and there are also 3 price to pay to activate each of the three following additional features:
flash EDC-16 (65 €),
ESP coding (95 €),
access to all files for VIM coding on various VAG vehicles (105 €).
(it is rare, but the VAG CAN + K PRO interface is also in clone / unofficial 3 with additional features enabled, clone VAG CAN PRO for nearly 59$ form XCAR360.COM
about VAG CAN PRO vs VAS 5054A vs VCDS
5054a ODIS is OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.
VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.
VCP is little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB.
about VAG CAN PRO vs VAS 5054A vs VCDS
5054a ODIS is OEM, so it fully supports every VAG model, but it’s slow and you need online connection for being able to do a lot of things.
VCDS is super fast, best to read DTC’s and do basic stuff and some coding, but it doesn’t work well with new MQB platform.
VCP is little bit a mix of those, reads DTC fast, every feature is done offline, and work very well with MQB.
