MPPS V13.02 MPPS Interface - Chiptuning, removing the DPF EGR NOx Speed limiter Lambda OFF + Support

MPPS V13.02 MPPS Interface - Chiptuning, removing the DPF EGR NOx Speed limiter Lambda OFF + Support .With this interface you can read the memory of the drivers like. EDC15x, EDC16x, EDC17x, M. ME7x, MED9x, Siemens PPD, Marelli Mutlijet like. Exact list below ...

Aligning batches of these drivers enables customers to:

• Chiptuning - raising power and torque
• Ecu tuning - optimization program to reduce the combustion
• DPF / FAP OFF - the ability to programmatically disable particulate filters
• Disabling program called speed limiters. speed limit off
• Corrections starting dose (problems with the firing on the warm)
• Disabling EGR software
• Swirl flaps in the 2.7 and 3.0 TDI VAG and Jaguar - disable programs
• NOx sodný software off
• Lambda OFF - software off the lambda probe

MPPS interface allows you to read data from memory controllers for later editing which allows you to:

• increase the power and torque
• change the torque limiter
• delete the data from the memory controller responsible for the DPF / FAP (thanks to this function can be physically cut particulate filter and software it off the map driver so that the driver does not record the defects associated with its absence, the car will procowało as if there was no pre-filter)
• increase the dose boot repairing the same problem of "difficult fires to warm"
• Remove or lock establish speed
• all other things related to the engine controller memory editing.

ATTENTION !!!
Offered interface allows only rip and upload files to the driver called. flash to make any of the above activities, eg. off the DPF or chip tuning themselves to be read via an interface to edit files using separate programs.

You can also send the contents of a harmonious consideration we aim to edit, then our technicians are editing your files as desired, eg.
increasing power and torque, excluding software EGR or DPF / FAP like.