Share a key programming instruction with you all. Operation images from a Chinese customer who has managed to program Peugeot 408 new keys with original Launch X431 V (X431 pro). Program immobiliser key to Peugeot requesting for pin code.
-----Xcar360 Automotive diagnostic tool , diagnostic software sales@xcar360.com
Model:
Peugeot 408 2013, VIN= LDC943X48C13*****
Note:
– Prepare security code/pin code (usually under the spare key card, the last 4 letters after C9000000; if lost, ask the 4S store for help)
– No need a diagnostic tool when the high-frequency remote control synchronizes (key emission frequency is not the same), just press the scan tool and follow the screen instruction.
Operation to add new keys with Launch X431 V Pro:
1 select Peugeot v42.92 or newer versions
2 select car-> 408-> 408（2010.01-2014.09）
3 select Diagnosis
4 select a system
5 select Embedded Systems Interface (BSI), then communicate with ECU for about 15s
6 the system prompt the menu will be different on different models
7 select Special Function
8 select Repair Kit
9 select Learning
10 Select Key Programming
11 enter the security codes to continue
(wrong security codes will stop the process)
Note: all keys should be programmed together
12 click OK and enter the pin code?twice
13Confirm pin code. Ready to program keys.
14 enter keys number (maxi:5)
Here, keys number: 2
15 turn ignition off
16 turn ignition on within 15 seconds
17 key programming success, and prompt that key programming complete, turn ignition off and take out?the key
18 quickly insert the second key to program
19 turn ignition on within 15 seconds
20 key programming success, and prompt that key programming complete, turn ignition off and take out the key
21 click OK, and now programmed keys number: 2
22 Check handbarke Is applied and gear shift in position “P” (automotive transmission)/gear shift in neutral position (manual transmission)?before?start the engine
23 remote control programming, follow menu instruction step by step strictly
24 remote control matching complete
25 test the remote control and use the key to start the engine
remote control and new keys are verified working…Done!
Disconnect Launch X431 diagnostic system.
Xcar360 Automotive diagnostic tool , diagnostic software
More information
Contact
Steven
Senior Sales Engineer
Xcar360.com
Skype:uuc050
Whatsapp:8613922818729
No comments:
Post a Comment